TeSys D contactor – 4P(2 NO + 2 NC) – AC-1 <= 440 V 125 A - 110 V AC 50 Hz coil

Features

• range TeSys
• product name TeSys D
• product or component type Contactor
• device short name LC1D
• contactor application Resistive load
• utilisation category AC-1
• poles description 4P
• power pole contact composition 2 NO + 2 NC
• [Ue] rated operational voltage Power circuit: <= 300 V DC 25...400 Hz Power circuit: <= 690 V AC
• [Ie] rated operational current 125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
• control circuit type AC at 50 Hz
• [Uc] control circuit voltage 110 V AC 50 Hz
• [Uimp] rated impulse withstand voltage 8 kV conforming to IEC 60947
• overvoltage category III
• [Ith] conventional free air thermal current 125 A (at 60 °C) for power circuit
• Irms rated making capacity 1100 A at 440 V for power circuit conforming to IEC 60947
• rated breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947
• [Icw] rated short-time withstand current 640 A 40 °C - 10 s for power circuit 990 A 40 °C - 1 s for power circuit 135 A 40 °C - 10 min for power circuit 320 A 40 °C - 1 min for power circuit
• associated fuse rating 200 A gG at <= 690 V coordination type 1 for power circuit 160 A gG at <= 690 V coordination type 2 for power circuit
• average impedance 0.8 mOhm - Ith 125 A 50 Hz for power circuit
• [Ui] rated insulation voltage Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Power circuit: 1000 V conforming to IEC 60947-4-1
• electrical durability 0.8 Mcycles 125 A AC-1 at Ue <= 440 V
• power dissipation per pole 12.5 W AC-1
• Front cover Without
• mounting support Plate Rail
• standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
• product certifications DNV RINA LROS (Lloyds register of shipping) GL CCC UL BV GOST CSA
• connections - terminals Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: connector 1 cable(s) 4…50 mm²flexible without cable end Power circuit: connector 2 cable(s) 4…25 mm²flexible without cable end Power circuit: connector 1 cable(s) 4…50 mm²flexible with cable end Power circuit: connector 2 cable(s) 4…16 mm²flexible with cable end Power circuit: connector 1 cable(s) 4…50 mm²solid without cable end Power circuit: connector 2 cable(s) 4…25 mm²solid without cable end
• tightening torque Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm Power circuit: 9 N.m - on connector hexagonal screw head 4 mm
• operating time 20...35 ms closing 6...20 ms opening
• safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
• mechanical durability 10 Mcycles
• maximum operating rate 3600 cyc/h 60 °C
• coil technology Without built-in suppressor module
• inrush power in VA 200 VA 50 Hz cos phi 0.75 (at 20 °C)
• hold-in power consumption in VA 20 VA 50 Hz cos phi 0.3 (at 20 °C)
• heat dissipation 6…10 W at 50 Hz
• contact compatibility M1